ReadyMadeRC
FAT SHARK CAMERA AND TRANSMITTER MOUNT COMBO
,
Fat Shark Camera Fixed Tilt Mount and Transmitter Mount Fits ...ReadyMadeRC
GRAUPNER 3D-PROP 8"X4.5" LEFT
,
Overviews The new Graupner 3D PROP propellers are designed primarily ...ReadyMadeRC
GRAUPNER 3D-PROP 8"X4.5"
,
Overviews The new Graupner 3D PROP propellers are designed primarily ...ReadyMadeRC
GRAUPNER SPORT-PROP 8"X4.5" LEFT
,
Overviews The new Graupner SPORT PROP propellers are designed primarily ...ReadyMadeRC
GRAUPNER SPORT-PROP 8"X4.5"
,
Overviews The new Graupner SPORT PROP propellers are designed primarily ...ReadyMadeRC
RMRC 3A POWER REGULATOR - 12 VOLT (UBEC)
| Output | 12V 3A continuous, 4A burst |
| Input | 14v-35v (4-8S Lipo) |
| Size | 42x22x8.5mm |
| Weight | 20g including cables |
Specifications:, , WARNING:, Please make sure you know what voltage your system requires before powering up!,
High quality Ready Made RC, LLC 12V 3A UBEC w/ ...ReadyMadeRC
FY-G3 ULTRA 3-AXIS BRUSHLESS GIMBAL FOR AIRCRAFT
| http | //youtu.be/wIFOWAwBo7Y |
| http | //youtu.be/-OVfotQxy8w |
FY-G3Ultra 3-Axis Brushless Gimbal For Aircraft ---- Ground Test :, FY-G3Ultra 3-Axis Brushless Gimbal For Aircraft ---- Flight Test :, FY-G3 Ultra Gimbal needs to be initialized when the following situation appears:, 1. After power on, the angle of pitch has a little angle difference with the horizon line., Initializing the FY-G3 Ultra Gimbal:, Keep the gimbal in the still condition, then power on , it will initialize automatically.After that the gimbal can work normally.,
Introduction FY-G3 Ultra 3 Axis Brushless Gimbal ( For Aircraft ...ReadyMadeRC
CARBON-Z CUB BNF BASIC
| Wingspan | 84.6 in (215 cm) |
| Overall Length | 55.8 in (142 cm) |
| Wing Area | 1100 sq. in. (71.0 sq. dm.) |
| Flying Weight | 8.15 lb (3.70 kg) |
| Motor Size | 50-size brushless outrunner (installed) |
| Radio | 6+ channel DSM2/DSMX transmitter (required) |
| Servos | (4) 26-gram MG mini servos, (2) 13-gram micro servos (installed) |
| CG (center of gravity) | 4.72 in (120mm) back from leading edge of wing |
| Wing Loading | 17 oz/sq ft |
| Prop Size | 15 x 5.5 Electric (included) |
| Speed Control | 60-amp brushless (installed) |
| Recommended Battery | 22.2V 6S 3200mAh LiPo (required) |
| Flaps | Yes |
| Approx. Flying Duration | 7 minutes |
| Minimum Age Recommendation | 14 years |
| Experience Level | Intermediate |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
| Spinner Size | 2.64 in (67mm) |
Optional Accessories:, - Float set (EFL1045016), Retracts: No,
Features Easy-to-complete final assembly Quique Somenzini design and attention to ...ReadyMadeRC
SPORT CUB PNP
| Wingspan | 51.0 in (1300mm) |
| Overall Length | 34.0 in (865mm) |
| Flying Weight | 33.3 oz (945 g) |
| Motor Size | 480 Brushless Motor 960Kv |
| Radio | 4+ channel (5+ channel for optional flaps) (required) |
| Prop Size | 9 x 6 |
| Speed Control | 18 amp brushless ESC (installed) |
| Recommended Battery | 11.1V 3S 1300mAH LiPo battery (required) |
| Flaps | Optional |
| Landing Gear | Yes |
| Steering | Yes |
| Experience Level | Intermediate |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |
ReadyMadeRC
PARKZONE - SPORT CUB BNF PKZ6880
| Wingspan | 51.0 in (1300mm) |
| Overall Length | 34.0 in (865mm) |
| Flying Weight | 33.3 oz (945 g) |
| Motor Size | 480 Brushless Motor 960Kv |
| Radio | 4+ channel (5+ channel for optional flaps) (required) |
| Prop Size | 9 x 6 |
| Speed Control | 18 amp brushless ESC (installed) |
| Recommended Battery | 11.1V 3S 1300mAH LiPo battery (included) |
| Flaps | Optional |
| Landing Gear | Yes |
| Steering | Yes |
| Experience Level | Intermediate |
| Recommended Environment | Outdoor |
| Assembly Time | Less than 1 Hour |
| Is Assembly Required | Yes |